Main Assignment 2
Programme Name:Bachelor of Engineering Technology (Honours) Mechanical Engineering (Top-up)
Module Title: Computer Aided Analysis (BEng Tech)
Module Code: MMD3040-N
Non-linear analyses
This assessment covers learning outcomes 2, 4, 6, and 8 for this module and the standard University assessment criteria for this level apply. According to certain engineering standard, a ring gasket is required to have around 0.2mm of permanent deformation so that flange can be sealed tightly as shown in Figure 1. As an engineer, you are required to determine the appropriate pressure level to be applied on the ring gasket. The geometry of the gasket can be modelled as octagonal toroidal as shown in Figures 2(a) and 2(b). It is noted that the side of the octagon is of s and the diameter
is of 860mm.
MMD3040-N Computer Aided Analysis Assignment-Management Development Institute of Singapore.
Assume that the steel has a constant Young’s Modulus of 185 GN/m2 up the yield stress of 240 MN/m 2, and then varies as follow:
The Poisson’s ratio is given by 0.32.
MMD3040-N Computer Aided Analysis Assignment-Management Development Institute of Singapore.
Produce a report on your work of 3000 words, which includes:
1.Coverage of finite element theories on non-linear analysis
2.Explanation of the procedures on how the Finite Element Analysis is carried out through NX
3.Generate the results through NX software and graphs with detail discussions
4.Conclusions of the results
5.Briefly explain what you have learnt on each tutorial and exercise
This assessment is to be individual work.
You are required to submit your soft copy report through blackboard. In addition, all of your simulation works stored in a CD/DVD (include report) is to be handed in to my office by Thursday 1 st April 2021 by 4:00 p.m.
MMD3040-N Computer Aided Analysis Assignment-Management Development Institute of Singapore.
Excellent Assignment Help
We Aim At:
- Lowest Price.
- 100% Uniqueness.
- Assignment Fastest Delivery.