Objectives:
To understand IP addressing schemes and sub net addressing.
This is an individual assignment. Students are not permitted to work in a group when writing this assignment.
This is an individual assignment. Students are not permitted to work in a group when writing this assignment. Plagiarism is the submission of another person’s work in a manner that gives the impression that the work is their own. La Trobe University treats plagiarism seriously. When detected,penalties are strictly imposed.
CSE2NFX Network Engineering Fundamental Assignment-Latrobe University Australia.
Background:
A multinational company called “Andrew & sons” has 6 branch offices around the world. Each of the branch offices has number of hosts.
This assessment has two parts, Part A and Part B. You must complete both parts.
Part A: Design an IP Addressing scheme for a given scenario.
The company would like to restructure their existing network into a new IP addressing scheme to deploy on their various branches.
This task has been assigned to you by your supervisor.
Host requirement for each branch is listed below.
CSE2NFX Network Engineering Fundamental Assignment-Latrobe University Australia.
• Branch 1 should accommodate 30 hosts.
• Branch 2 should accommodate 25 hosts.
• Branch 3 should accommodate 28 hosts.
• Branch 4 should accommodate 30 hosts.
• Branch 5 should accommodate 20 hosts
• Branch 6 should accommodate 22 hosts
You are given 192.168.50.0/24 as the base network address to design the IP sub netting scheme for the company.
Tasks
Design the IP sub netting scheme as per the above-listed requirements.
Task 1: Calculate the sub netting information.
• Number of sub net bits (borrowed bits) required to accommodate the addressing requirements
• Total number of sub net
• The new sub net mask of the IP sub netting scheme
• Number of remaining host bits
• Number of hosts per sub net
• Use able number of hosts per sub net
Task 2: Derive sub net work address
Derive the sub net work addresses as per the given answers in Task 1 and based on the following conditions.All calculations/methods that you have used to derive the answers should be included as part of your answer. Complete Table 2 with your answers.
• Use 0th subnet for Branch 1 Network.
• Use 1st subnet for Branch 2 Network.
• Use 2nd subnet for Branch 3 Network.
• Use 3rd subnet for Branch 4 Network.
• Use 4th subnet for Branch 5 Network.
• Use 5th subnet for Branch 6 Network.
Task 3: Calculating the host address ranges
This task is a continuation of Task 2.
Calculate the host address range and useable host address range of sub net works derived in Task 2. All calculations/methods that you have used to derive the answers should be included as part of your answer.Complete Table 3 with your answers.
• 0th subnet – host address range, useable host address range (In dotted decimal notation)
• 1st sub net – host address range, useable host address range (In dotted decimal notation)
• 2nd subnet – host address range, useable host address range (In dotted decimal notation)
• 3rd subnet – host address range, useable host address range (In dotted decimal notation)
• 4th subnet – host address range, useable host address range (In dotted decimal notation)
• 5th sub net – host address range, useable host address range (In dotted decimal notation)
Part B: Re-design an IP addressing scheme as per changed requirements.
CSE2NFX Network Engineering Fundamental Assignment-Latrobe University Australia.
During the next five years, there were two other companies acquired by “Andrew & Sons.” Moreover,the company experienced immense growth in production, the number of branches, and the number of employees.
Altogether there are 8 branches now.
Host requirement for each branch is as follows.
• Branch 1 should accommodate 8000 hosts.
• Branch 2 should accommodate 4000 hosts.
• Branch 3 should accommodate 4094 hosts.
• Branch 4 should accommodate 2049 hosts.
• Branch 5 should accommodate 3002 hosts.
• Branch 6 should accommodate 4092 hosts.
• Branch 7 should accommodate 2000 hosts.
• Branch 8 should accommodate 1020 hosts.
The company would like to re-design their IP addressing scheme to facilitate this new requirement.
This task has been assigned to you by your supervisor.
You are given 130.100.0.0/16 as the base network address to design the IP sub netting scheme for the company.
Note:
Part B of the assessment should be designed based on the given class B network address, 130.100.0.0/16.
You will not be using VLSM (Variable Length Subnet Mask) in your sub netting scheme; assessment should be completed with traditional or simple sub netting.
All calculations should be included as part of each answer.
Tasks
Design the IP sub netting scheme as per the above-listed requirements.
Task 1: Calculate the sub netting information.
Calculate followings. All calculations/methods that you have used to derive the answers should be included as part of your answer — complete Table 1 with your answers.
• Number of sub net bits (borrowed bits) required to accommodate the addressing requirements
• Total number of sub nets
• The new sub net mask of the IP sub netting scheme
• Number of remaining host bits.
• Number of hosts per sub net.
• Use able number of hosts per sub net
Task 2: Derive sub net work address
Derive the sub net work addresses as per the given in Task 1 and based on the following conditions. All calculations/methods that you have used to derive the answers should be included as part of your answer.
Complete Table 2 with your answers
• Use 0th subnet for Branch 1 Network.
• Use 1st subnet for Branch 2 Network.
• Use 2nd subnet for Branch 3 Network.
• Use 3rd subnet for Branch 4 Network.
• Use 4th subnet for Branch 5 Network.
• Use 5th subnet for Branch 6 Network.
• Use 6th subnet for Branch 7 Network.
• Use 7th subnet for Branch 8 Network.
Task 3: Calculating the host address ranges
This task is a continuation of Task 2.
Calculate the host address range and use able host address range of sub net works derived in Task 2. All calculations/methods that you have used to derive the answers should be included as part of your answer.
Complete Table 3 with your answers.
• 0th subnet – host address range, useable host address range (In dotted decimal notation)
• 1st subnet – host address range, useable host address range (In dotted decimal notation)
• 2nd subnet – host address range, useable host address range (In dotted decimal notation)
• 3rd subnet – host address range, useable host address range (In dotted decimal notation)
• 4th subnet – host address range, useable host address range (In dotted decimal notation)
• 5th subnet – host address range, useable host address range (In dotted decimal notation)
• 6th subnet – host address range, useable host address range (In dotted decimal notation)
• 7th subnet – host address range, useable host address range (In dotted decimal notation)
Submitting your assessment
When you have completed the tasks for both Part A and Part B, submit the assessment on the LP.
You should submit the following:
Submit your answers in a single word document called xxx_cse2nfx_Assessment 2.docx (where xxx is your student number).
Excellent Assignment Help
We Aim At:
- Lowest Price.
- 100% Uniqueness.
- Assignment Fastest Delivery.